MANUFACTURED FOR LONG LIFE

Allied EMT is precision manufactured from high grade mild strip steel for exceptional durability and long-lasting life.

Allied EMT is produced from pregalvanized mild steel followed by a conversion coating and a clear topcoat to protect against corrosion.

Allied EMT provides shielding of electromagnetic fields, while its uniform wall thickness provides resistance to physical damage from impact or crushing.

INSTALLS QUICKLY AND EASILY

Allied EMT's quality steel combines damage resistant strength with ductility to provide easy bending, cutting and joining to prevent waste of time and material. It resists flattening, kinking or splitting, resulting in faster and easier installations.

Allied EMT provides smooth continuous raceways for fast wire-pulling. The interior wall of Allied EMT is protected with a specially formulated corrosion resistant lubricating coating for easier fishing and wire-pulling. No need to worry about damage to the conduit system even when pulling through multiple 90° bends.



FULL CODES
STANDARDS COMPLIANCE

Allied EMT is U.L. listed and recognized by the National Electronic Code. It meets the Underwriters Laboratories' Standard for EMT, U.L. 797. Allied EMT is also manufactured to meet the requirements of ANSI C80.3. Federal Specifications now use U.L. 797 and ANSI C80.3 in lieu of WWC 563. Recognized as an equipment grounding conductor (NEC Article 250-91b).

Installation of EMT shall be in accordance with the National Electrical Code#FJMX.

Master bundles conform to NEMA Standard RN2.

SPECIFICATION DATA

To specify Allied EMT, include the following: Electrical Metallic Tubing shall be equal to that manufactured by Allied Tube & Conduit Corporation. EMT shall be hot galvanized steel O.D. with an organic corrosion resistant I.D. coating and shall be produced in accordance with U.L. Safety Standard #797 and ANSI C80.3 and shall be listed by a nationally recognized testing laboratory with follow-up service. Where Kwik-Fit EMT is used it shall also meet U.L. Safety Standard #514-B. it is noted that these U.L. and ANSI standards have been adopted by the federal government and separate military specifications no longer exist.


Trade Size Designator
Approx. Wt.*
Per 100 Ft.
(30.5M)
Nominal
Outside Diameter1
Nominal
Wall
Thickness2
Quantity
In Primary
Bundle
Master Bundles
Quantity
Aapprox. Wt.
Volume
U.S.
Metric
lb.
kg
in.
mm
in.
mm
ft.
m
ft.
m
lb.
kg
cu ft.
cu m
1/2
16
30
13.6
0.706
17.9
0.042
1.07
100
30.5
7000
2135.0
2100
952.4
28.7
0.81
3/4
21
46
20.9
0.922
23.4
0.049
1.25
100
30.5
5000
1525.0
2300
1043.1
35.6
1.01
1
27
67
30.4
1.163
29.5
0.057
1.45
100
30.5
3000
915.0
2010
911.6
33.7
0.95
1-1/4
35
101
45.8
1.510
38.4
0.065
1.65
50
15.2
2000
610.0
2020
916.1
35.0
0.99
1-1/2
41
116
52.6
1.740
44.2
0.065
1.65
50
15.2
1500
457.5
1740
789.1
34.2
0.97
2
53
148
67.1
2.197
55.8
0.065
1.65
-
-
1200
366.0
1776
805.4
46.7
1.32
2-1/2
63
216
98.0
2.875
73.0
0.072
1.83
-
-
610
186.1
1318
597.7
41.5
1.18
3
78
263
119.3
3.500
88.9
0.072
183
-
-
510
155.6
1341
608.2
48.9
1.38
3-1/2
91
349
158.3
4.000
101.6
0.083
2.11
-
-
370
112.9
1291
585.5
48.6
1.38
4
103
393
178.2
4.500
114.3
0.083
2.11
-
-
300
91.5
1179
5347
48.3
1.37
 
    |  EYE  |  LEGRAND |  SCAME  |  WHEATLAND  |  HAZLUX  |  WEBER  |  BUSSMANN  |